Book Display for Front of Bookshelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to hold one book on the shelf in front of the others for display. Superglue 2D art or paint it for extra flare.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 987
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a bookend made especially to hold one book for display in front of your other books. Creates a beautiful display for a shelf, great for displaying a series or to put the book you're actively reading in to easily grab it. It's purposefully plain, I superglued some 2D wings (can be found here https://www.printables.com/model/379311-2d-wings) for a lovely display. It's low enough that you can see your book, resize based on your book size. It goes under the books behind it and edges are tapered so as not to damage your rectangular friends.
Please note there are 2 .gcode files, one with a 0.4mm nozzle, one with 0.6mm so choose according to your printer. If you'd like to resize or alter it there's also the .stl file.
There may be slight lifting of the front corners, if this bothers you you can add a small raft (I didn't notice until I looked at the bottom but it wasn't enough to notice while displayed)
Note: books are for example of display only, this design has not been endorsed by the authors of these books.