Kingroon KP3S v3 Titan Fan Duct and Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan duct and mount carrying one 40mm fan for hotend cooling and two 40mm blowing fans for part cooling.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 1668
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
It is not pretty, but it works well. It clips onto the cooling block and is then fastened with screws. I attached a tiny PCB with a 24v to 12v step-down converter to run the silent Noctua fan. Two 24v blower fans do the part cooling.
This design does not compromise cooling performance while allowing an unobstructed view of the nozzle and part.
In my case, the KP3S metal printhead mount is not perfectly square. So it took some squeezing and tweaking to make things fit. Please keep that in mind when giving this a try.
