Cassette Keychain Lite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small size so you can carry in your pocket.
- Ocena
- 4,909 / 5
- Polubienia
- 238
- Pobrania
- 655
- Wydruki
- 28
- Wyświetlenia
- 2503
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Do you want to sell prints of my designs,
get all my designs for $8, or just support me?
Check my patreon page: https://patreon.com/bigovereasy
update 14 feb 2023
------
- Cassette_whole(increased clearance).stl
This version is relevant for 0.4mm nozzle. There is a clearance of 0.3mm between the reel and the body.
------
- Cassette_whole.stl
There is a clearance of 0.18mm between the reel and the body. Version is relevant for 0.3mm wall thickness (respectively 0.3mm nozzle) at 0.15mm layer. If the wall thickness is 0.4 mm, set the "horizontal extension" to -0.05 mm (negative value). By default, this value is zero.
----
Anyway, when printing is done, the reel must rotate hard. I applied silicone grease Glidex and washed with water, after which it rotated perfectly.
print in place, no supports
Cassete Keychain with case :
https://cults3d.com/en/3d-model/home/cassete-keychain