Heartbeat Vase for vasemode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to print in vasemode and in high quality
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 269
- Wydruki
- 5
- Wyświetlenia
- 861
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heartbeat Vase for vasemode
If you like it --> press like it :-)
Make your loved ones happy with this vase!
Remixed the georgeous model by DaveMakesStuff, that
- you have high quality with smoother surface
- you can print it in vase mode to get a perfect finish
I also added the file for normal print mode, but i realized that the bottom is not flat, so i cutted it a little that you have a flat bottom.
Take a look at my other models, there you can find more models for valentine.
At vase mode prints i allways recommend to print with a wider line width. It is possible to print without problems a line width of 0.6 to 0.8mm with a 0.4mm nozzle. Slightly increase the temperature.
Here a preview of the HQ model for printing with 0,4mm nozzle and 0,8mm line width, 0,12mm layer height and bottom layer → only 20g!!!
If you like vase mode prints, especially which are no vases, you can join our group https://www.printables.com/de/group/vase-mode-explorations-everything-but-vases-15zYdDQ/comments
Would be happy to see your makes!