Stephanie's Knotted Vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large Knotted vase. 110mm in diameter, 177mm total height. With the right settings it should be watertight.
- Ocena
- 5 / 5
- Polubienia
- 173
- Pobrania
- 991
- Wydruki
- 15
- Wyświetlenia
- 4492
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
A large Knotted vase. 110mm in diameter, 177mm total height.
With the right settings it should be watertight.
There are two versions:
Full - This version is for single material machines. It has been optimized for printing on single extrusion machines.
Inner & Outer - These are meant to be printed together on a multi-material printer. The Outer object could be printed on a single extrusion machine and used as a more decorative vase.
Geeky Faye was my inspiration for this. Go see her cool vase and other prints https://www.prusaprinters.org/social/60410-geeky-faye
Update 25-8-2020: I made some slight modifications to improve printability.
Update 26-8-2020: I created a smaller version as scaling doesn't work very well for these types of models.
The size is 81mm diameter and 128mm tall. The pillars and wall thickness have been increased slightly, and there are a few minor cosmetic changes.
Feel free to ask for modifications and I will see if I can accommodate (next i'll probably do a cutout on the bottom for a LED).
Update 08-11-2020: updated to a V2 version. This has a more substantial base and some fixes I've been meaning to do. The larger vase will eventually be modified to accommodate a LED, and include a removable base (battery powered lamp!)
Print instructions
I printed it at 60mm/s with Slic3r, auto extrusion width and 0.3mm layer height and 100% cooling. You need to have your extrusion rate calibrated very well.