1 / 1
HT-40 Bypass Air for Vacuum Station
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Vential makes it possible to let additional air into the system during the vacuum system. Required if you have…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This Vential makes it possible to let additional air into the system during the vacuum system. Required if you have connected a device that has a very low air flow rate.
A small screw is needed to fix the two parts together. If you don't have such a small one, you can simply drill the hole bigger.
Print Settings
Printer:
Sidewinder X1
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament:
Filament PLABlack
Category: 3D Printer Accessories