Deko Lamp Shades - Partial shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This lampshade is for a normal LED lamp. It is only 180° to allow the max amount of light i.e. to the side walls.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is one of several lamp shades I designed. All of them use the same mounting mechanism.
This shade is for a “normal” LED bulb and I printed the top layers in transparent filament, so that more light shines on the ceiling. It blocks only 180° of light, so that i.e. sidewalls can reflect the light and create a nice ambient lighting.
This design also requires 7xM3 screws to mount the cap to the lamp.
Please be aware that this design is for a LED bulb, since old bulbs will be too hot for 3d printed parts! I also printed everything in PETG, to that its more temperature resistant.