Replacement baffle for ThermoFisher iCE 3000
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement baffle for the ThermoFisher iCE 3000 atomic absorption spectrometer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution
This is an attempt at making a replacement part for the ThermoFisher iCE 3000 atomic absorption spectrometer. At this time it is not known if the part actually works. There are two versions of the STL file, one with a little support added at the bottom. Either one should be printed with slicer support enabled, but the one with explicit support added will probably print cleaner, and the heavier support can still be easily clipped away with wire cutters.
The photo shows, from right to left, the broken original part, a part printed at 0.08mm layers, and the part printed at 0.16mm layers – which seems the best for the Bambu X1 Carbon using natural PLA. They are shown upsidedown relative to the orientation they were printed in. Notice that the tripod is thickened to meet printing design rules.