1 / 6
Cap and Net Cup for 100mm (4") pipe and 63,5 (2,5") hole to hydroponic system
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap and Net Cup for 100mm (4") pipe and 63,5 (2,5") hole to hydroponic system
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 635
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
This is my 1st model to hydroponic system. I designe the version 2.0 to have a offset. The version 3.0 dont have it, you will need sand the edges.
To print it dont need suports, i used 4 perimeters and 10% infil.
