1 / 20
Rotring Rapid drawing board lock system
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Locking system for the Rotring Rapid design plate on which it was broken.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
Locking system for the Rotring Rapid design plate on which it was broken.
Two parts :
- the first is the cover that holds the second.
- the second is the part which pivots and allows to block the slat.
Warning. I noticed that even for design plates bought at the same time, the versions are not the same (difference of a few millimeters).
I didn't desing the small piece that slides because it was not broken like the others, I can make one just leave a comment.
Print instructions
Print Settings
Printer: Prusa i3 MK3
Supports: Yes : Blue piece printed upside down (see photos on the slat). No need for the red one.
Resolution: 0.15 mm or 0.2 mm (or 0.3 mm for the red one)
Infill: 15% or 20%
Filament: Daring DarkBlue Ice Filament 1.75 mm PLA