V3 - 1590a ish for diy guitar effects with jacks and footswitch holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V3 - replaced the pegs and holes style connectors with semi-spherical connectors around the lid (see new pictures).
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
V3 - replaced the pegs and holes style connectors with semi-spherical connectors around the lid (see new pictures). Printed with prusa mini and connection is pretty solid. I added a small slot at one end of the lid to pry it case you need to open the box.
Added box with no holes drilled in case you want to play around with this. mod in tinkercad here: https://www.tinkercad.com/things/gHXlGrC6ccU-1590a-ish-with-holes-for-jacks-and-switch
V2.fixed issue with corner supports / connectors protruding through top of box.
fixed 45 degree bevels on lid
1590a ish with jacks and footswitch holesI modeled this in tinkercad loosely based on 1590a dimensions:
https://www.tinkercad.com/things/gHXlGrC6ccU-1590a-ish-with-holes-for-jacks-and-switchI have not yet printed but when I do I will update with any details. When I get around to building this for a project I will add a version with the holes for pots and status LED. You should be able to drill them in the appropriate location or you can edit the tinkercad file.
Not sure of PCB size you could fit in here, I have not yet printed. The connectors should work as I have used them for other projects:
https://www.tinkercad.com/things/jXtRjgTB08R-snap-and-socket-shape-generator-updated
Print instructions
0.2mm layer height worked pretty well with PLA.