1 / 1
Samsung Galaxy S21 Ultra Honeycomb Case — zdjęcie 1

Samsung Galaxy S21 Ultra Honeycomb Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Samsung Galaxy S21 Ultra Honeycomb Case

Ocena
4,8 / 5
Polubienia
121
Pobrania
2037
Wydruki
5
Wyświetlenia
7347
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a case I designed for my S21 Ultra. I was not happy with the few printable models I found online for the S21 Ultra. After I made 5 prototypes I discovered that TPU was super slick in the hand so I added the honeycomb texture to the sides. With SLS/MJF this is much less of an issue. I did always want the honeycomb pattern on the back and thoroughly enjoy it. Tolerances are for SLS/MJF printing and there are 3 separate parts that need to be printed. There is the main body and the power button and volume button. The power and volume buttons just slide into place from inside the case and rest on the phones actual buttons. They slide in their slot allowing the main buttons to be depressed properly without being constantly pushed on.

 

Edited 2/17/23 ***Fixed the button layout/location to better be aligned with the power and volume button***.

Tagi