Wine glass tea light lampshade with heart cutouts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shade with heart cutouts to put over a wine glass used to hold a tealight candle.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 871
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
A shade for a wineglass tealight candle with heart cutouts. This shade was meant to go over a wineglass that has a tealight in it. The model was designed for a glass with a brim outer diameter of ~66mm. Scale it to fit your glass.
I have used this model with a real tea light for a few hours of burn time with no ill effects on the PLA shade. You may want to use an LED candle if you are scaling it down for a smaller diameter wine glass.
A solid shade has been added for remixing with your own cutout design, or print the solid shade with no mods in spiral vase mode with the first millimeter solid.
This model is a redesign of my earlier attempt at a wine glass tealight lampshade. It is thicker to be able to print it with cutouts.