1 / 5
OWON HDS242; OWON HDS2102 etc. Heavy rubber armor — zdjęcie 1
1 / 5

OWON HDS242; OWON HDS2102 etc. Heavy rubber armor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavy additional armor for your expensive handheld device. Has to be printed from soft material.

Ocena
0 / 5
Polubienia
11
Pobrania
36
Wydruki
1
Wyświetlenia
611
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is heavy additional rubber armor plating for the expensive handheld OWON oszilloscopes. Will safe your device if accidentally dropped (does not protect the probe connectors). This element does not interfer with any of the OWONs normal functions and interfaces i.e. connectors.

 

==> Relies on the elasticity of the material for assembly; has to be printed out of High flex material and pulled over the OWON.

==> Removing the support with rubber printing is extremely challenging, care has to be taken not to get the support stuck. A very sharp knife like a box cutter or a scalpel may be necessary

==> Print with 1 perimeter and ca. 20% fill (lines or gyroid) and thin infill lines so that it can act like a foam absorbing the impact and protecting the device.

Tagi