1 / 4
XT60 Strap Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits up to 20mm wide straps. I printed this in PETG and press fitted the connector.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 654
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (25)Powiązane
Fits up to 20mm wide straps.
I printed this in PETG and press fitted the connector. If you want to be able to remove the connector without destoying the holder you can try and scale it up by 1%.
20-05-05
Added a beefier version with thicker walls
Print instructions
Category: R/C Vehicles Summary
Fits up to 20mm wide straps.
I printed this in PETG and press fitted the connector. If you want to be able to remove the connector without destoying the holder you can try and scale it up by 1%.
20-05-05
Added a beefier version with thicker walls