VGA plug for NetDot gen10 USB cable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed adapter to fit NetDot 10th generation magnetic USB adapter cable, and use M3 bolts.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed the original to fit the NetDot 10th generation magnetic USB adapter cables. (ASIN: B07QB6HVFY).
I'm also not fond of gluing everything together (and possibly ruining the cable), so it has been changed to use 2x M3x20mm bolts for assembly instead.
The grey cover plate might require a tiny amount of glue to stick in place though, but it's hardly a loss if it has to be broken off later on.
After printing (depending on what materials you print with, settings, supports etc.) you might have to scrape or sand off a bit of plastic on the overhangs. Otherwise it might not join up perfectly.
I printed the blue parts out of PETG, with supports (from build plate only).
And I had to sand off a tiny bit on the overhangs to make it fit well.
The grey cover plate was printed with PLA.