1 / 1
Cover plate for KORG Nu:Tekt NTS-2 Oscilloscope
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protects the oscilloscope, & makes the buttons easier to press.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (19)Powiązane
The oscilloscope is well made, but the screen is not well protected, being surface mounted on top of the unit. Bigger buttons are also nicer to press.
You can fit a thin screen protector under the bezel for additional protection (I used some plastic from discarded packaging).
To install just place on top, with original screws replaced with 10-15mm M2.5 machine screws (I used 12mm).
The LEDs would look better with light pipes, but I don't know the best way to achieve that (any advice anyone?)
Printing:
- Body: Printed with top surface on build plate, with no supports.
- Buttons: I printed them top surface on build plate, with supports, so that the bit you touch is nicely textured.
- Encoder: Top surface on build plate, with no supports.