Under Desk PSU Storage Structure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage structure to hide PSUs under my desk instead of keeping them on the ground or on my desk.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 1225
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I had multiple PSUs sitting on my desk and on the ground, so I designed this structure to store them under the desk. It was the largest size I could print on my Ender 3 S1 Pro. I've printed 2 (two) of them and each one stores 2 (two) PSUs.
I kept flat surfaces on the top because I didn't want to screw the structure under my desk. I'm sticking it to the desk using a double sided tape and it is strong enough to hold 2 PSUs.
The honeycomb surface brings some nice aesthetics to it and also allows additional ventilation to minimize the risk of overheating the PSUs. I made it using PrusaSlicer and this is why I've only uploaded the 3mf file (no STL). I couldn't replicate this effect on Cura and I wasn't able to design good honeycomb patterns with my regular CAD software.
It should be an easy print… I've printed it with no supports.
My main settings
- Printer: Creality Ender 3 S1 Pro
- Resolution: 0.2mm
- Infill: 10%
- Material: PLA
- Rafts: No
- Supports: No
- Slicer: PrusaSlicer