Arduino Nano Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure for an Arduino Nano that lets you use breadboard wires
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
It's an Arduino Nano enclosure that you can use with breadboard type wires to reduce soldering. It has access for the (Mini) USB and a hole for wires as well as a door to be fully enclosed. I included an option for mounting with M3 screws but I tried to leave some room to drill it out to the diameter of your choosing.
If your printer can handle bridging reasonably well, you can print it as is. Otherwise, print it with the USB and wire holes at the bottom and use some supports for the door hooks.
The example in the cover photo is attached to my make of Aquarium Fish Feeder by Shiura. https://www.printables.com/model/171318