Canon 1.25 eyepiece adapter with locking mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of adp97's eyepiece adapter, but fixed tolerances and with locking mechanism
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 179
- Wydruki
- 5
- Wyświetlenia
- 861
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
adp97's adapter had a lot of play, making the adapter fall out when lightly shaking my camera, as it didn't include the locking mechanism found on the lenses.
I basically scaled the mode up by 1%, then added a flange with a hole in which the locking pin sits. I also took away some plastic to reduce the amount used.
Now it fits great without any play and without a chance of my camera dropping.
I printed the adapter with the 1.25" barrel downward to make sure the bigger flange would print correctly. This causes a rougher surface finish but on surfaces that do not matter functionally.
If anyone wants a 2" version, let me know and I can make one