Dell OptiPlex 7050 MFF Faceplate Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement logo for the front bezel of a Dell OptiPlex 7050 MFF. Might fit other MFF models, but I can't test that.
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 2474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently got a Dell OptiPlex refurb and the logo wasn't pristine. Gasp! Gave me the idea to model and print a new one. Since I installed Ubuntu on this machine, I thought it would be cool to have the Ubuntu logo on it.
I've added 3 different models, Ubuntu, Dell (replica of the original), and a blank one in case anyone wants to remix it.
I printed it in PLA. The logo at about 50% speed for best adhesion and 0.10mm layers for best color. The main body was printed at “normal” speed with 0.20mm layers. These worked well for me, but your specifics may vary.
To prevent cracking of the stem when inserting the screw, I did it immediately after the print was done, while still warm. Not sure how much it helps, but I placed the screw on the print bed while printing so it would also be warm. This caused the stem to flare a bit at the end for a tight fit when going through the hole in the bezel, but it worked fine for me.
I followed this process from Make Anything's youtube to create the embedded logo.