Collapsable Lightsaber with belt clip and blade locker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
COLLAPSABLE LIGHTSABER WITH BELT CLIP AND BLADE LOCKER
- Ocena
- 5 / 5
- Polubienia
- 83
- Pobrania
- 453
- Wydruki
- 5
- Wyświetlenia
- 3351
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
COLLAPSABLE LIGHTSABER WITH BELT CLIP AND BLADE LOCKER
After I printed a collapsable lightsaber from 3DPRINTINGWORLD for my son, I decided to design my own.
I've added a belt clip mechanism that also prevents the blades to unfold.
I've also added a clamp at the end of the bigger blade that can hold a small light (19mm diameter).
If you want to design your own part(s) and still use one part designed by me, check the images for the thread. You can thread your part in fusion360 with the same settings to make it compatible.
I planned to design something that can be used to lock the blades also without the belt clip, but I dropped this idea for now.
The Pommel has to be printed with support.
Side note: after this make, I decided to buy a combat-ready lightsaber and join LudoSport
Some of the designs that inspired me: https://www.thingiverse.com/thing:3606120 https://www.thingiverse.com/thing:3668138 https://www.thingiverse.com/thing:4232699 https://www.thingiverse.com/thing:3699920 https://www.thingiverse.com/thing:3806512 https://www.thingiverse.com/thing:3929324 https://www.thingiverse.com/thing:4273631
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
100
Filament: REAL PLA Grey Install the lock, sliding it in from the bottom ===============================================
Try the locking mechanism