Odroid H3 Type 3 top for 92mm Noctua 14mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Odroid H3/H3+ Type 3 case top panel for 92mm Noctua NF-A9x14 PWM
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 766
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I wanted the fan (NF-A9x14 PWM) to be placed within the box instead of outside.
There's unfortunately not enough space between the heatsink and the top panel and the connectors get in the way too.
So the fan hole had to be moved and extra height added to accomodate the fan.
BEWARE - bottom left case screw colides with the fan. I'm NOT going to fix it for now - the model serves its purpose otherwise and 3 out of 4 screws are good enough.
Model of the original top plate attached for reference. Please allow for some measuring errors, but it was used to create the fan-panel model, which works fine, so I guess it's accurate-ish enough.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament: DD PETG Galaxy Gray
Category: Electronics