Slim ODD Mount for Sliger S620
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very quick-and-dirty mount to put a slim slot-loading optical drive behind the front panel of a Sliger S620…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is avery quick-and-dirty mount to put a slim slot-loading optical drive behind the front panel of a Sliger S620 PC case. You will need four M2x2 screws to mount the bracket to your drive. You will also need three screws to mount the bracket to the case - I used M3 screws. You'll also need a #6-32 thumb screw or maybe a right angle screw driver for one of the PSU screws.
I used the power supply mount with the PSU fan facing the side of the case... if you're using the front/back facing orientation, I think it'll still work, but you're on your own for assembly.
I don't think this will work for a tray-loading drive, at least not without removing the front panel when you want to use the drive.
Post-Printing
You'll first have to drill out the holes for mounting to the case for whatever screw you use.
Mount the brackets to the optical drive. The drive will be installed with the label side facing the case. Insert the power supply into the cage, but do not mount it to the cage - you'll need to be able to move it to access a screw. Mount the cage to the case. Mount the optical drive brackets to the case. You'll be screwing in the brackets from inside the case. Once the drive is screwed in, you should be able to move the power supply in place and screw it in.