Fishing Steelhead Drift Bobbers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable drift bobbers that are lighter than solid injection moulded ones to hit near neutral buoyancy even with hooks.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 840
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
8mm and 13mm versions of steelhead drift bobbers, originally for my Dad. His preference/recommendation was bright &/or translucent colors. Holes for the fishing line are 1.25mm on the 8mm diameter ball and 2mm on the 13mm diameter ball.
The advantage of these printed versions is they are lighter than neutrally buoyant, allowing you to hit neutral buoyancy for the entire hook and bobber array depending upon your infill and tackle. Easily purchased injection moulded variants are solid and heavier, often advertised as neutrally buoyant on their own but then become heavier with the full tackle array and thus have a tendency to drop below the line of sight of fish along the river bottom.
There is a flat side on each ball to make adhesion to the build plate easier, depending on your filament and printer tuning no additional bed adhesion like brims or rafts should be needed.