Raspberry Pi 40-Pin GPIO Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the Raspberry Pi GPIO pins, to prevent accidentally shorting them out when using a case that leaves them open.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 976
- Wydruki
- 8
- Wyświetlenia
- 2927
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Cover for the Raspberry Pi GPIO pins, to prevent accidentally shorting them out when using a case (such as this one) that leaves them exposed. This remix has a lip at the top for easy removal -- it's not a tight fit (assuming your printer settings are dialed in right), but some cases make it tricky to get out otherwise.
There are two versions included here -- one that covers all the pins, and one that has a gap on pins 5 and 6 if you have a power button connected to your Pi.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
100%
Filament: Sainsmart PLA Black
Category: Electronics