1 / 7
Replacement Wheel for 1:24 Die-cast Monster Truck — zdjęcie 1
1 / 7

Replacement Wheel for 1:24 Die-cast Monster Truck

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement wheel that fits the official Monster Jam 1:24 die-cast monster truck toys (no tire, just the wheel)

Ocena
0 / 5
Polubienia
24
Pobrania
274
Wydruki
0
Wyświetlenia
3742
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We found this cool Grave Digger toy abandoned at the park with a broken off wheel so I took it home and got the tire off with a heatgun and did some measurements and research and found the linked model that was almost the right design to replace the OEM. 

My remix removes the 5 or 7mm axle hole that goes all the way through the wheel, replacing it with a 2.25 x 12mm hole that the knurled end of the axle press fits into. I moved some parts of the inner hub to make room for the new hole without the axle punching through and added some little vanes to strengthen the connection. Decorated the inner hub some additional rows of lugs to more closely resemble the toy wheel I was replacing. (Also spent way too long cleaning up the model before I made any changes because the imported STL had nearly a million polys for this one little object and it was kind of a nightmare to work with.)

Printed on Prusa MINI+ in [Polymaker Silk PLA - Silver] with .20mm layers and 100% infill. I put the model at 45° so that the layer lines wouldn't be aligned with the main stress angle, and used PS 2.6a3 organic supports. The auto-generated supports turned out to be a little insufficient on my first print and there was a bit of sagging in some areas so I've allowed more supports in the included .gcode file which should alleviate that a bit.

I'm uploading my Blender project file, the PrusaSlicer 3MF project, and G-code. 

To the OP of the linked model, thanks for the work you did on your wheel! And to anyone else downloading this, enjoy! 

Note: some of the photos are of the v.1 prototype before I added some more decorative only features.

Tagi