1 / 1
Yet Another PTFE Tube Cutter (marked for Prusa MK3S+)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guide to cut PTFEs, with a mark for MK3S+ tube length of 43mm
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
The tool should ‘lock’ the PTFE tube into place for cutting. Use any regular penknife to cut.
The short tick marks indicate 1cm. The long tick mark to the cutting edge should be 43mm, the length of PTFE tube needed for the MK3S+. This assumes your printer has been tuned for dimensional accuracy