Impossible Dovetail Piggy Bank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Piggy bank with lid that is secured with an impossible dovetail joint.
- Ocena
- 4,467 / 5
- Polubienia
- 221
- Pobrania
- 1636
- Wydruki
- 14
- Wyświetlenia
- 6108
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution
At first, this piggy bank appears impossible to open, with a dovetail joint on all four sides. In reality, this is a simple box with two parallel dovetails, spanning the same direction as the coin slot.
Print Instructions: Print both models with the z axis oriented the same as in the STL. No supports necessary. Slicing with 3 shells and a 0.4mm extrusion width will completely fill the walls and making it solid. The lid and bottom can be printed at the same time with any printer that has a similar build volume to the Ender 3.
*Update: The Bottom-Tall model is double the height of the original (140mm).