Sweeeeep (Wired only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low pro gasket mount case for the Sweeeeep (wired version only) with optional tenting.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case design for the Sweeeeep by fingerpunch, wired version only. It is a gasket mount design that fastens with 6mm magnets and has optional tenting via M3 heatset inserts. The case is super low profile, with only 5mm between the bottom of the PCB and the desktop.
There is a new version added 5/23/23 that is for plateless builds with switches soldered to the PCB. The base has a ledge to line the inside of the base with 3mm foam, resting the PCB right on the foam.
Magnets: https://www.amazon.com/DIYMAG-6x3mm-Refrigerator-Premium-Brushed/dp/B07KZQGWNN
Heatset inserts: https://www.amazon.com/gp/product/B09ZNXRD2H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Tenting legs: https://www.printables.com/model/276982-switch-blockers-tenting-legs-and-knobs