Arc1 Arcade Fightstick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: FInished and successfully cut. Feel free to use these files to create your own toolpaths. or cut your own.…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 690
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: FInished and successfully cut. Feel free to use these files to create your own toolpaths. or cut your own.
Another Fightstick Case this one is a good deal smaller and simpler. Should be easier to make provided you have the tools.
The first setup in the Fusion 360 file is the better looking higher quality one but it's not as fast as the second and requires some long reach ballnose bits.
The second setups cuts faster, is 99.99 percent as good, and is easier to find tooling for.
(.5 inch 2 flute straight cut router bit (i used the diablo) and a .25 inch 2 flute endmill both of which are easily sourced at a big box hardware chain.)
Category: Video Games