JUSH Filament Holder baseplate <> adapterplate for Anycubic Kobra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an addition to one of the best filament spool holders/rollers out there, the JUSH by jordo_drago.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is an addition to one of the best filament spool holders/rollers out there, the JUSH by jordo_drago. JUSH is a remix of the famous TUSH spool holder, only better :-).
I created this adapter/baseplate in order to mount the JUSH system on the Anycubic Kobra (standard) . When you have only few or no space next to your printer, this is my solution for you.
It features the use of the stock screws of the original Kobra filament holder, the possibility to use JUSH in full width (even two spools on top of the Kobra possible e.g. for quick filament change) and filament guide holes to the extruder which also prevent a spool fall off in case of tangling.
Please have a look at the JUSH page, download both stl's and print them in 100% size in order to use my adapterplate. Be advised you need at least four 608 bearings to let the JUSH roll. Use the stock screws of the original Kobra filament holder to mount it on top. Do NOT glue the JUSH base to the adapterplate, screws are underneath :-).
Kudos to jordo_drago, filamentry and the Kobra community!
Notes:
Print it laying flat.