Moon Lamp stand/socket for LED circuit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adequate stand/socket for the amazing moon lamp made by moononournation.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 825
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for an adequate stand/socket for the amazing moon lamp made by moononournation. He designed a special version of his progressive detail moon lamp with a thread to screw in a base at the bottom. Unfortunately there are no instructions for his base and how you can fill it with a LED. So I came up and designed a stand for myself, compatible to the thread of the moon lamp. A LED circuit fits perfectly and the lamp can be recharged from underneath.
The stand/socket is ready to use a LED circuit like this one. (Check dimensions of your board)
You need the moon lamp file from here.
The file is "moon_lamp_4_inches_refinement_level_360Y10_16mm_screw_socket.stl"
Be aware of a very long printing time for the moon :-) Mine took almost 40h due to the detail of the print with resolution 0.1. Printing time for the stand is about 5-7h depending of the printing speed.
Printing 100% scale of the moon and stand and both parts will fit very well. For the stand set resolution to 0.15 to give the text on the stand a quality shape.
Print it laying flat.