Rugged filament sample box | Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my remix of Rugged filament sample box
- Ocena
- 4,939 / 5
- Polubienia
- 245
- Pobrania
- 1131
- Wydruki
- 35
- Wyświetlenia
- 5693
- Oceny
- 33
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is combination of remixed and original files. This box holds 30 filament samples.
Box, lid and latches are unmodified, samples are redesigned to fit box better. Insert is completely original design.
To assemble you need 6 x M3 30mm screws. Depending on your printer accuracy, insert might be a little tight fit but it should just to be pressed in place, as down as it goes.
EDIT: Made little fixes to the box. There was weird overhang, but now it's fixed.
EDIT 2: Added modded insert. Made it bit more open and faster to print.
Print settings
Box
- 0.2mm layer hight
- No supports
Latches
- 0.2mm layer hight
- solid 5 walls to get more rigid
Insert
- 0.28 layer hight for faster printing
- 12% infill
- 2 walls
Samples
- 0.2mm layer hight
- 2 walls
- 12% infill