AA and AAA battery holder for Honeycomb Storage Wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AA and AAA battery holder for the Honeycomb Storage Wall system with more robust interlocking and mounting mechanism.
- Ocena
- 4,9 / 5
- Polubienia
- 259
- Pobrania
- 1217
- Wydruki
- 24
- Wyświetlenia
- 4905
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I completely remade the holder but used the original as an inspiration. Watch out, dimensions are probably different and therefore not compatible with the original.
The original design by @kitlaan had "lips" that interlocked together to make the left and right parts into one. These lips were, at least in my case, very fragile and broke off quite easily.
This design uses simpler and more robust locks.
Superglue the parts together for easier manipulation during the installation.
Both AA and AAA parts can hold about 17 batteries each.
Use HSW M3-nut-inserts (or my alternative https://www.printables.com/model/398581-insert-for-hsw-with-m3-square-nut) and M3x16 countersunk bolts to fix it to the HSW.
UPDATE 2023-03-12: As some of you guys noticed, the first version of the design was meant for traversal mounting of the HSW. To accommodate those who mounted their HSW “the normal” way, I have added new files with mounting holes in the right places. Enjoy!