1 / 2
Battery organizer (20xAA, 20xAAA, 2x9V and 4xCR2032)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small battery organizer for AA, AAA, 9V and CR2032 batteries.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 317
- Wydruki
- 4
- Wyświetlenia
- 1089
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (1)Kolekcje (61)Powiązane
This is a custom made battery box organizer for 20xAA, 20xAAA, 2x9V and 4xCR2032.
Print Settings
Material: PLA
Layer height: 0.2 mm
Perimeters: 3 (you can use 2 but the sides flex a little when you push)
Top layers: 4 layers
Infill: 15% lightning (lightning infill will save some filament)
Supports: no need if you have good cooling