Magnetic screw tray mk2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic screw tray organiser with a 7x5 grid of 20x20x5mm receptacles and a lid that has a whiteboard.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 937
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A magnetic screw tray organiser with a 7x5 grid of 20x20x5mm receptacles and a lid that has a whiteboard.
The addition on the whiteboard lid allows for documenting which screws/parts are which, while adding further security against losing parts if moving/storing.
Printed in PLA with TPU 95A for the feet.
Non printed parts:
6x M3x6 cap head screws
2x 1.5x10mm split pins (lid hinge)
Self adhesive magnetic sheet, 112x156x2mm (I cut a piece from an A4 sheet)
Self adhesive whiteboard sheet, 154x109mm
Stick the magnetic sheet to the recess in the base then screw on the grid and press in the feet.
For the old version without the lid (though this will work fine without one) see here: https://www.printables.com/model/376928-magnetic-screw-tray