1 / 4
Titan Fitness J Cup Protector X3 Rack — zdjęcie 1
1 / 4

Titan Fitness J Cup Protector X3 Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

J Cup protector for Titan Fitness X3 rack

Ocena
5 / 5
Polubienia
8
Pobrania
37
Wydruki
1
Wyświetlenia
529
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial

This is a J cup protector designed to fit the Titan Fitness branded version for their X3 rack with a single mounting screw.  It may fit other brands with a single mounting screw and 3x3 uprights.  This protects your barbell when re-racking since they only come with UHMW on the top.  Consider this a wear item and it will require replacement over time if you put heavy weight on it.  I have had up to 340lbs on PLA versions with 3 walls.  That lasted about 3 years (lifting 4 times per week) before I wore enough down with the knurling on my barbell that I was worried about the mounting screw scratching my barbell.

I printed the latest version in Polymaker Polylite ABS at 0.32mm layer height with 5 walls and 50% infill.  It did not require supports around the mounting screw hole.  

Tagi