1 / 1
Prusa Mini RHD Fan Duct Rev. C - Adjustable heigh version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original model from Olof Ogland was nice but the exits from the fan were way too high - it was directly blowing at…
- Ocena
- 4,917 / 5
- Polubienia
- 79
- Pobrania
- 698
- Wydruki
- 8
- Wyświetlenia
- 4214
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 8) (Komentarze: 39)Remiksy (0)Kolekcje (213)Powiązane
@update
Added version 8 - slimmer and even lower.
The original model from Olof Ogland was nice but the exits from the fan were way too high - it was directly blowing at heater block ,not the print.
What I did was making hole for the screw bigger - now you can adjust the heigh and its just hold by friction
Tested the duct made in PETG, it worked fine when printing PETG on 90*C bed , so it would suffice.