RCBS Vibratory Tumbler replacement feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the original rubber vibration isolation feet.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement for the original rubber vibration isolation feet. This print makes use of the original hardware including the nut that is glued inside. Part dimensions should be close enough to allow replacing of only one foot as needed but doing all 3 at one time is recommended.
Print instructions
As a replacement for a rubber part use a flexible filament such as TPE or TPU. I used a generic (and very cheap) TPE and printed it at 100% infill. The part is stiff but still flexible.
Printing in TPU or a more rigid flexible filament may be better done with a lighter infill to ensure the part doesn't turn as hard as a hockey puck.