Milwaukee M12 Fuel Bit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3-position, ¼″ hex bit holder for Milwaukee's M12 Fuel line of tools.
- Ocena
- 3,571 / 5
- Polubienia
- 240
- Pobrania
- 1220
- Wydruki
- 8
- Wyświetlenia
- 6740
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3-position, ¼″ hex bit holder for Milwaukee's M12 Fuel line of tools. Mounts using the stock clip mount--either in place of, or on the other side of, the stock clip.
A right and left STL is provided to fit either side or the orientation of your choice.
Use the existing mount screws or a M2.5×6 pan- or socket-head screw.
Print instructions
Just about any settings will work fine. Print tab-down with the bit recesses oriented vertically. The 3mf file includes both STLs oriented correctly--delete the part you don't need.
Even PLA produces a usable part. More perimeters lead to a stronger part--3 is sufficient, but 4 would probably be stronger.
Supports are minimal and recommended unless your printer is the king of overhangs.