1 / 4
Bitte nicht Stören schild für Sennheiser Momentum 2 Kopfhörer - Do not Disturb — zdjęcie 1
1 / 4

Bitte nicht Stören schild für Sennheiser Momentum 2 Kopfhörer - Do not Disturb

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Do not Disturb sign to clip on my Sennheiser Momentum 2 Over Ear Headphoines.

Ocena
0 / 5
Polubienia
8
Pobrania
44
Wydruki
0
Wyświetlenia
682
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution — Share Alike

This is a Do not Disturb sign to clip on my Sennheiser Momentum 2 Over Ear Headphoines. I created it because it is often very loud in my office and nobody gets the message not to disturb me, when i have my Headphones on, so i have to be a little more clear with the message. it is very subtle and will be Printed in Transparent Red and probably fitted with some LED's to make it even more subtle ;)

I will add Photos when im done printing it.

I lowered the bump on the clip a little to remove stress while putting it on.

Print instructions

Unassociated tags: Do not Disturb, Momentum 2

Category: Gadgets Summary

This is a Do not Disturb sign to clip on my Sennheiser Momentum 2 Over Ear Headphoines. I created it because it is often very loud in my office and nobody gets the message not to disturb me, when i have my Headphones on, so i have to be a little more clear with the message. it is very subtle and will be Printed in Transparent Red and probably fitted with some LED's to make it even more subtle ;)

I will add Photos when im done printing it.

I lowered the bump on the clip a little to remove stress while putting it on.

Print Settings

Printer: xyzprinting DaVinci 1.0 PRO 3in1

Rafts: Yes

Supports: Doesn't Matter

Resolution: 0,2mm

Infill: at least 50% the clip breaks quite fast at 15%

Notes:

FDirst print was with 15% infill, the clip broke while removing it from the Printbed. I recommend 50 or even 100% infill, but that is quite a lot for the Letters themselves.

Tagi