AEG QX8 charger tab replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement tab for charging station for aeg 18V duster, e.g. QX8, CX7
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement tab for the AEG QX8 stick vacuum cleaner. This part holds the vacuum on the charging stand to charge it.
I put 2 M3 heat set inserts in it. To mount it, you drill two holes 14mm apart (you can use the template provided) in the remaining part of the charging base and mount it with 2 M3 screws. 15 or 20mm should be fine. Above te heat set inserts the hole narrows down so if you don't have inserts it should also work by just tapping into the plastic.
Print with PETG as this should be more durable than PLA for such a stressed part.
Designed in Fusion360