1 / 3
Clips to secure wood or paper to Snapmaker laser work surface — zdjęcie 1
1 / 3

Clips to secure wood or paper to Snapmaker laser work surface

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These clips replace the rubber things Snapmaker provides to secure work for laser cutting or engraving.

Ocena
5 / 5
Polubienia
43
Pobrania
298
Wydruki
2
Wyświetlenia
943
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

The clips will push into the aluminum work surface used on the Snapmaker machine when set up for work with laser. One side pushes against thick work, the other will hold down paper or cardboard. I found the rubber pieces that Snapmaker provided too difficult to position accurately. There are 2 files included one is thicker than the other for lager work like wood. The best thing is that if the laser cuts one be accident, just print another.

Tagi