Vehicle Gas Cap Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handheld tool to open and close a vehicle's gas cap for drivers with limited hand dexterity.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 1168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Vehicle Gas Cap Opener helps drivers with limited hand dexterity with opening and closing gas caps. There are several commercial and DIY options available for opening vehicle gas caps, but most focus on grip strength issues, with limited options available for users with limited hand function.
To use, the + shaped end of the gas cap opener over the gas cap on the car. The handle on the opener can then be turned to either tighten or loosen the cap, as normal.
If this device does not function with the gas cap on your vehicle, please get in touch with us so we can make changes to the design to make it compatible with more vehicles.
Each opener will need:
- 2 x Handle.stl
- 2 x Knob.stl
- 1 x Pin.stl
Print Settings
Infill: 20%
Resolution: 0.2mm
Supports: Yes for the handle. No for the knob and pin
Rafts: No
Build Tutorial
Printed assembly manual can be found in the Files tab.
About Makers Making Change
Makers Making Change is an initiative of the Neil Squire Society, a Canadian non-profit that empowers people with disabilities through technology.
We leverage the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
🔸 Volunteer to print a device
🔸 Tackle a design challenge
🔸 Submit an assistive device idea