Velcro Strap Mount for CWMorse Pocket Paddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Leg Strap for a CWMorse Pocket Iambic Morse Code Paddle
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a leg strap mount for the CWMorse Pocket Paddle: https://cwmorse.us/products/blue-yellow-pocket-double-paddle-morse-code-key
CWMorse sells a leg strap mount for their Pocket Paddles, but I wanted one that would work with the Velcro Strap like in Adam's design so I made this. I was concerned that the leg strap mount that CWMorse sells would cause the paddle to slide around on my leg so I made this.
I have discovered that 2 M3x10mm screws work perfectly with this. I used some that came in the spare parts provided by Prusa Research in the MK3 kit. The holes on the Pocket Paddle are 0.125" so an M3 screw will self-tap into the body.
I was unaware of the datasheet so the holes aren't aligned perfectly. If printed in PETG you can get it to fit with a little bit of force. Its a snug fit! The screws also don't appear to go in perfectly straight but once you start tightening they straighten up!
The velcro strap used can be found here: https://amzn.to/3uEozas