Better Pro'sKit SS-969 heat gun holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better heat gun holder Pro'sKit SS-969 - holds the heat gun more securely
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 276
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I was getting frustrated with how easily the Pro'sKit SS-969 heat gun would fall out when moving the whole thing. This replacement part holds the heat gun more securely. (You can still easily take it out when you actually want.)
Print instructions: During print, insert 12x3mm magnets in the two cavities. Or double up 12x1.5mm magnets like I did. The cavities will be taller than the magnets; push the magnets all the way in. This is needed for the auto-power-off function. I also matched the original magnets polarity. (That might not be strictly necessary.)
PETG, 0.2mm layers, 15% infill, no supports
F3D file is included.