Lathe QCTP Tool Holder Rack - OXA size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is one of three versions : AXA size OXA size (this one!)
- Ocena
- 1 / 5
- Polubienia
- 15
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 777
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This is one of three versions :
- AXA size
- OXA size (this one!)
- A2Z size
This is a re-mix of this print :
https://www.thingiverse.com/thing:4545509
Related video here : https://youtu.be/2Odj_uWx0Xs
I recreated the original in my own CAD drawing for two main reasons :
First, the original holder is the wrong size for my QCTP.
Second, if you look at the original, you will see that it is designed for a tilted back board. Since I needed these for a vertical back board, I also made an angled bracket so they could be mounted to the backboard at an angle.
The bracket is designed to mount to the holder with four #8-32 x 1/2" flat head screws (M4 x 0.7 would probably work also). The bracket needs to be threaded with a standard tap. The bracket mounts to the back board with two #8 flat head screws.
My OnShape 33D CAD files for this are here :
Print instructions
Print in PLA using the 3mf file provided; otherwise:
For the holder :
- 0.2mm layer height
- perimeters = 2
- infill 20% grid
For the bracket :
- 0.2mm layer height
- perimeters = 3
- infill 10% rectilinear
Print the bracket with the shortest side oriented downward - in this way no supports are needed.
These settings could likely be tweaked further, although I do recommend using at least 3 perimeters on the bracket where the tapped holes are located.