1 / 2
36mm Film digitizer for a 72⌀ Sigma lens
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple design film digitizer I have made in fusion, works great.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (42)Powiązane
A simple design film digitizer I have made in fusion, works great.
This design was made for 18-300mm Sigma Macro Lens
(No idea if you can fit it on another lens so keep that in mind)
Extension tubes are required for being able to focus so close
Print instructions
High details on the thread and no supports, I printed both parts in around 4h on a prusa mini
Lens adapter:
I used a skirt for better adhesion
Film slider:
Print the film slider part with the flat surface on the bed