PCI bracket for Quadro M2000 P2000 P2200
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full height PCI bracket for the Nvidia Quadro M2000, Quadro P2000, Quadro P2200. Related part numbers: 846379 844223-001
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 744
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Full height PCI bracket for the Nvidia Quadro M2000, Quadro P2000, Quadro P2200 and likely some other Quadro based cards like PNY Quadro cards with 4 ports
Related part numbers: 846379 844223-001
I needed this part because my card was bought second hand without this PCI bracket. The metal replacement part/bracket was way too expensive for such an old card (±€15) so printing a simple version to only hold it in place seems best.
Instructions:
Print with supports! Printed with PET-G for increased strength. PLA will probably also work, but this model is already really flimsy with PET-G so I would advise to use that instead of PLA.
I might improve the model eventually by adding more thickness. Also removing the supports from the model is hard. One of the tabs even broke when I removed the supports. But since it holds 6 screws, it should be solid enough for a server, workstation or other computer that sits still and only needs to hold the GPU in place.
You might need to source some special screws for this to hold it in place, for example M2 or M2.5 nuts and bolts. I've used a single M3 screw in the top and 4x M2 screws for each connector. This makes the whole bracket very sturdy.